Custom Injection Molding

Cast kirksite cavities from SLA models can provide excellent rapid tools for prototype and bridge to production injection molding parts. Parts can be molded in two to three weeks in any thermoplastic production resin, this technology has been around for many years, but with the growth of stereolithography and the need for rapid turnaround of plastic parts in the correct production material, the kirksite approach has re-emerged. More complex parts can be made using handloads. Injection molding tapers are important and are best incorporated in the master file. One of the advantages of kirksite aluminum/zinc alloy moulds is the ease of making geometry modifications by either welding or adding inserts. Another main benefit is the ability to mold most materials.

Over-mold injection molding and two-shot injection molding are two distinctly different molding methods even though both are used to combine multiple polymers into a single part. Because of this similarity, the two are often confused or misapplied by the design engineer. The more finite capabilities of these two molding methods differ as much as their required tooling, machines and often, the resulting part cost. Choosing the right method can be a critical factor in achieving targeted features, cost and time-to-market. Both methods can be used to create the soft-touch products popular in today's marketplace. However, both methods can be applied to other applications where multiple polymers must be combined into a single part. Over-mold injection molding is used for parts that do not require fine detail and can absorb the higher cost of machine time and labor. 2-shot injection molding is reserved for parts requiring fine detail and low part cost.

High volume injection molding capabilities and precision tool makers in their China Factory allow us to provide quick-turn service on medium to high volume orders, where they build dedicated long-run production molds. The company specializes in high volume plastics injection molding custom plastics jobs. High-end second-op machining is also available. Their PVC and plastic injection molding factories in China manufacture very high quality products that are extremely cost effective. Their warehousing and distribution facility in Austin, Texas also allows them to service custom injection molding projects in Dallas, Houston, San Antonio and other cities across the country very easily.

Injection molding caused a high fiber attrition resulting in an average fiber length of 390 and 350 µ m for formulations with and without coupling agent, respectively. The effect of jute fibers on the tensile and bending strengths was poor when there was no coupling agent. The addition of MAPP as coupling agent improved the composite performance by enhancing the adhesion between jute fibers and PP. The improved adhesion did partially offset the fiber attrition and the associated strength loss that resulted from injection molding. Fiber orientation occurred mainly in the melt-flow direction.

The Plastic injection molding machine has two parts: the injection unit which melts the plastic and injects the plastic into the mold, and the clamping unit which holds the mold. The injection molding unit clamps the mold in a closed position during injection, opens the mold after cooling, and ejects the finished custom part. Injection molding's efficiency varies by the number of parts you plan to produce. For a small quantity, such as 10 parts, it may be less expensive to simply machine the desired part utilizing a milling machine. On the other hand, if you desire several thousand parts, injection molding is ideal. When you submit your order for an injection molding part, the websites will assign staff to help evaluate the most appropriate mold material which will vary by part tolerance and number of units anticipated.