Injection Molding Machine

The corporation specializes in plastic injection molding molding, injection molding plastics design, custom injection molded plastics manufacturing in China and Taiwan at their manufacturing facilities. CAD plastic injection molding designer services are performed in Taiwan assisted by their engineers in the US. Rapid prototyping capabilities also compliment their plastic injection molding in China capabilities for customers in need of SLS prototypes quickly, for modeling and proof of design or concept. Their rapid prototyping, SLS and custom molding and plastics machining capabilities can get your new designs in solid form in a short amount of time.

Injection molding is a common method of producing intricate plastic components in high volume. Injection molds are made from hardened tool steel, although aluminum may be used for some low volume applications of injection molding. Injection molds can vary from machine simple open-shut injection molds, single cavity injection molds to complex multi-cavity injection molds with moving cores, stepped shut-offs, unscrewing devices. Due to the tonnage used in this high pressure process, proper materials, supports, parting line locks etc. must used to ensure the life of the mold. Cavities may be polished or textured to achieve a desired finish on the injection molded part.

The details of the design in a large part determines the cycle time of the machine. The cycle time is the amount of time it takes from the time a part is ejected from the machine to the time the next part ejects. Smaller parts require less "fill time", the time it takes for the machine to push the melted resin into the mold, and thinner part walls cool faster reducing the "hold time". The customer is charged a set up fee which pays for installing the mold into the injection molding machine, and getting it ready to mold parts. Typically it runs a couple of hundred dollars and depends on things like how big the mold is and which accessories will be needed etc.

Silicon molding services produce molded components made from silicon. Liquid silicone is similar to normal silicone, but has different processing characteristics. It is purchased as a two-part raw material with a grease-like viscosity. Nowadays injection molding of liquid silicon rubber is becoming increasingly important. One reason for this is the increased performance requirements of the finished articles. In addition, more and more producers of rubber parts are seeing benefits in the high level of automation and productivity. Why the preferred use of silicon rubber in injection molding Silastic silicon rubber is a shear material and so its viscosity depends on shear rate. As the shear rate rises the product becomes lower in viscosity. It is this effect that is very favorable for the injection molding process. At the beginning of the injection process the injection speed profile should be programmed in such a way that the volume flow is high enough for the liquid silicon rubber not to begin to vulcanize before the cavity is filled, in order to avoid scorch of the material. Thus liquid silicon rubber is widely used for the process of injection molding.