Us Injection Molding

The corporation specializes in plastic injection molding, injection molding plastics design, custom injection molded plastics manufacturing in China and Taiwan at their manufacturing facilities. CAD plastic injection molding designer services are performed in Taiwan assisted by their engineers in the US. Rapid prototyping capabilities also compliment their plastic injection molding in China capabilities for customers in need of SLS prototypes quickly, for modeling and proof of design or concept. Their rapid prototyping, SLS and custom molding and plastics machining capabilities can get your new designs in solid form in a short amount of time.

Injection molding caused a high fiber attrition resulting in an average fiber length of 390 and 350 µ m for formulations with and without coupling agent, respectively. The effect of jute fibers on the tensile and bending strengths was poor when there was no coupling agent. The addition of MAPP as coupling agent improved the composite performance by enhancing the adhesion between jute fibers and PP. The improved adhesion did partially offset the fiber attrition and the associated strength loss that resulted from injection molding. Fiber orientation occurred us mainly in the melt-flow direction.

Injection molding is a relatively new way to manufacture parts. It is a fast process and is used to produce large numbers injection of identical items from high precision engineering components to disposable consumer goods. Injection molding is often used in mass-production and prototyping. It produces such small products as bottle tops, sink plugs, children's toys, containers, model kits, disposable razors and parts of cameras. The process can even mould such large items as dingy hulls and kit car body shell parts. The advantages of injection molding are: high tolerances are repeatable, wide range of materials can be used, low labor costs, minimal scrap losses, little need to finish parts after molding. The disadvantages of injection molding are: expensive equipment investment, running costs may be high, parts must be designed with specific molding consideration.

The wonderful thing about plastic injection molding is the low cost of the parts being produced when you need a large volume of parts. The downside is the cost of injection molding tooling. The toolings, or the molds, range in price anywhere from $2000 for a simple one, to over a hundred thousand dollars for a big and complex injection mold. The way the injection molders figured out how much to charge per part was to weigh the part complete with runner to determine how much plastic resin is used for each part. The size of the part determines what size injection molding machine must be used, and how big the mold is etc.

The 2-shot injection molding process creates the first plastic component, and the material molded round it, using a single mold and a 2-shot injection molding machine. 2-shot machines have two-barrels (one for each material) and they have the ability to rotate the mold. The machine injects the first shot material into cavities on one side of the mold, rotates the mold 180 degrees, and then injects the second shot material onto the first shot. The first and second shots occur at the same time. When the mold opens, it ejects the completed parts from the second shot cavities and it rotates the mold to position the first shot for the second shot. This is accomplished in a machine running in an automatic cycle. Because the 2-shot injection molding process is fast and highly repeatable, the shrinkage of the first shot is very consistent and two materials can be molded together with virtually no flash. 2-shot molding is the process of choice when molded-in graphics or other fine details are required. The elimination of the shrinkage variable allows 2-shot molding to produce details impossible to achieve with over-mold injection molding.